Garment Factory Contract & Purchase Order Terms: A Buyer's Checklist
The product looks right, the price is agreed, and the factory says "no problem." Then the bulk order arrives with the wrong fabric, the wrong label, and a delivery date that slips by three weeks. Nine out of ten disputes we see between buyers and Chinese clothing factories trace back to one cause: the purchase order and contract were vague, not the factory being dishonest. A garment contract is not paperwork — it is the specification that the whole order is judged against.
Whether you are ordering custom dresses or two-piece sets, the same contract skeleton applies. This guide breaks down what a production-ready PO should always specify, the pricing terms that matter, the clauses that actually protect you, and the QC gates to build into the order — with a printable checklist at the end.
Bottom line up front: Write the order as if the factory has never made clothing before. Every material, measurement, milestone and remedy should be on the PO. Under our standard terms we work on FOB China port — the factory's responsibility ends at the Chinese port, and your freight forwarder handles the international leg. Get the contract clear and the FOB scope explicit, and most disputes never happen.
1. What Every Garment PO Should Specify
A purchase order is the contract. Before any deposit leaves your account, confirm the PO captures every dimension of the product and the deal. A missing line here becomes a "verbal agreement" argument later.
| Section | Must include |
|---|---|
| Product & style | Style number, tech pack reference, approved sample ID |
| Materials | Fabric composition, GSM/weight, colour standard (Pantone or swatch) |
| Construction | Stitch type, seam allowance, trims, label & hangtag spec |
| Quantities | Per size, per colour; total units and tolerance (±%) |
| Pricing | Unit price, currency, Incoterm (FOB/CIF/DDP) and port |
| Timeline | Sample date, bulk start, ready date, shipment date |
| Payment | Deposit %, balance trigger, accepted method |
| QC | AQL level, inspection point, defect remedy |
2. Pricing Terms: FOB vs CIF vs DDP
The single most misunderstood line on a garment quote is the Incoterm. It decides who pays for and arranges freight and customs — and it is where "cheap quote" turns into "expensive surprise."
| Term | Factory handles | Buyer handles | Note for apparel buyers |
|---|---|---|---|
| FOB (Free On Board) | Production + export packing + China port handover | International freight, destination clearance, delivery | Most common for China apparel; you control the ocean leg via your forwarder |
| CIF (Cost, Insurance, Freight) | Production + freight to destination port + insurance | Destination clearance & delivery | Convenient but factory marks up freight |
| DDP (Delivered Duty Paid) | Everything including destination customs & duty | Receives at door | Rarely quoted by Chinese factories; high risk & cost |
Scope note: We quote FOB China port and do not provide DDP or door-to-door pricing. Under FOB, our job ends at preparing export-worthy cartons and handing them to your nominated freight forwarder at the Chinese port; your forwarder arranges the international leg, destination customs clearance, and last-mile delivery. We prepare all export documents (commercial invoice, packing list, HS codes, certificate of origin) to your forwarder's spec. If you don't yet have a forwarder, we can introduce one or two for comparison.
3. The Clauses That Actually Protect You
A good apparel contract is not about punishing the factory — it is about removing ambiguity. These four clauses resolve the majority of real disputes:
- Approved-sample reference: Bulk must match the sealed/approved pre-production sample you signed off. This is your single strongest lever.
- Material substitution ban: Fabric, trims and accessories cannot be swapped without written approval; "equivalent" is not allowed.
- Defect & remedy clause: Defines acceptable quality (AQL level), who pays for repairs, and what happens above the defect threshold.
- Delay penalty / force majeure: A clear, bounded consequence for late delivery plus a defined force-majeure carve-out.
Tip: Keep the contract in plain language both parties understand. A beautifully drafted clause nobody reads is worth less than a one-line "bulk must match approved sample ID X." At Essty we confirm the approved sample and the full material spec at the counter-sample stage, before bulk cutting begins.
4. Sampling & Bulk Approval Gates
Build checkpoints into the order so problems surface at $20 of sampling cost, not $20,000 of bulk. A standard gate sequence:
Order approval gates
- Proto / design sample — confirm silhouette, proportions, overall look.
- Size set / fit sample — verify grading across XS–3XL before committing.
- Pre-production (PP) sample — sealed as the bulk standard; this is your reference ID.
- Top-of-production (TOP) sample — pulled from the first bulk run; catch drift early.
- Final inspection — AQL check on the finished, packed cartons.
Sampling is where many first-time buyers cut corners to save a few days. Don't. For custom clothing manufacturing, the PP sample is the contract's physical anchor — if bulk deviates from it, you have grounds to reject or renegotiate.
5. Payment Terms & Milestones
Payment structure is risk allocation. The goal is to keep enough leverage after the deposit that the factory delivers to spec.
- Deposit: Typically 30% to start production; avoids over-exposure if the maker underperforms.
- Balance: Usually 70% against a shipping document (bill of lading copy) or after final inspection pass.
- Milestone releases: For large orders, split the balance across PP-sample approval and final QC pass.
Caution: Avoid paying 100% up front, and avoid releasing the full balance before inspection. Tie the final payment to a documented QC pass so the factory stays motivated through the last carton. Under FOB, the balance is normally settled before or at port handover per your agreement.
6. QC, Defects & Remediation
Define quality before production, not after. The two decisions buyers most often skip:
- AQL level: General apparel sits around AQL 2.5 for major defects. Set it on the PO so "acceptable" is numeric, not subjective.
- Remedy path: If inspection fails, state whether the factory repairs, replaces, or discounts — and who pays return freight.
For a deeper look at setting your acceptance level, see our AQL inspection standards guide. The key is consistency: the same standard applied at TOP sample and final inspection.
7. Delivery Terms & Who Arranges Freight
Even with a perfect product, a vague shipping line creates arguments. The PO should state the Incoterm, the load port, the target sailing window, and the document the balance is released against.
- FOB China port: Factory delivers cleared goods onto the vessel; your forwarder books space and handles export declaration via their broker.
- Carton marks & packing: Confirmed to your forwarder's spec at the bulk stage (marks, polybag warnings, weight limits).
- Documents: Commercial invoice, packing list, HS codes, certificate of origin prepared by the factory for your forwarder to lodge.
This is also where lead time and MOQ matter. Our standard is 100 pcs per colour and 10–15 day production after PP approval — but the contract should write the date, not assume it. See how clothing lead times work and MOQ explained for the planning math.
8. Contract Mistakes That Cost Buyers Money
The recurring errors: (1) No approved-sample ID on the PO; (2) "equivalent fabric" language that lets the factory substitute; (3) FOB/CIF/DDP left blank so freight responsibility is disputed; (4) balance paid before inspection; (5) no AQL level stated, so "defective" is opinion; (6) delivery date with no consequence. Each one is a single line on the PO — write them and you remove 90% of dispute surface.
Send us your tech pack — we'll quote against a clear PO
We're a BSCI & ISO 9001 certified women's clothing manufacturer. FOB China port, 100 pcs MOQ, 10–15 day production, with sampling gates and AQL inspection built into every order.
Start a WhatsApp Conversation →Or email: sales@esstygarment.com
9. Frequently Asked Questions
Do I need a formal contract or is a detailed PO enough?
A detailed, signed PO is the contract for most apparel orders. What matters is that it captures product spec, price, Incoterm, timeline, payment and QC — not the document's letterhead.
What Incoterm should a first-time buyer choose?
FOB China port is the standard and the safest to learn on: you control the ocean freight through your own forwarder and the factory's responsibility is clearly bounded at the port. Avoid DDP unless you have a partner who handles destination customs for you.
How much deposit is normal?
Around 30% to start, with the balance tied to inspection or shipping documents. If a factory demands 100% up front, treat it as a risk signal and verify them first (see how to verify a Chinese supplier).
What if bulk doesn't match the approved sample?
If the PO references the sealed PP sample ID, you can reject, request repair/replacement, or negotiate a discount per the remedy clause. This is exactly why the sample ID belongs on the contract.
Who arranges freight under FOB?
Your nominated freight forwarder books and pays for the international leg and handles destination clearance. The factory prepares export documents and hands goods over at the Chinese port.
Can I split payment across milestones?
Yes, especially on larger orders. A common structure is 30% deposit, a portion at PP-sample approval, and the balance after final inspection — keeping leverage through delivery.
10. The Buyer's Checklist
Before you send the deposit, tick every box:
Garment factory contract checklist
- ☐ Approved PP sample ID written on the PO
- ☐ Fabric composition, GSM and colour standard specified
- ☐ Sizes, colours and quantities with tolerance stated
- ☐ Incoterm (FOB/CIF/DDP) and load port explicit
- ☐ Unit price, currency and what it includes
- ☐ Sample, bulk and shipment dates with consequence for delay
- ☐ Payment split with balance tied to inspection
- ☐ AQL level and defect remedy defined
- ☐ Material-substitution ban in writing
- ☐ Export documents and carton-mark spec confirmed
Related products:
- Women's 2-Piece Linen Set — Polyester/linen blend, $9.50/pc, 10-day production
- V-Neck Waist-Cinching Dress — Cotton-linen, $9.50/pc, 4 colors
- Bow-Tie Maxi Dress — Cotton-linen, $9.50/pc, 5 colors
Related guides:
- How to Read a Clothing Factory Quotation
- Clothing Manufacturing Lead Time
- Quality vs Price: How to Choose
Sourcing this category? Essty Garment is a Guangzhou-based custom clothing manufacturer producing BSCI and ISO 9001 audited production from 100 pcs per colour, with 10–15 day production and full private-label branding available. We also run dedicated lines for women's apparel manufacturing.