Packing and Shipping Activewear: Polybags, Cartons and Retail-Ready Packaging

Nov 11, 20268 min readBy Essty Garment

For activewear brands moving from samples to a first bulk run, packaging is not an afterthought. Moisture-wicking nylon-spandex and polyester blends need the right polybag, carton and retail-ready setup to arrive without odour, crushing or colour mix-ups. This guide covers the packing and shipping specs we use for our yoga wear manufacturer programme and the two-piece set manufacturing line, so a buyer can brief one supplier end to end and keep the landed cost predictable.

Why Activewear Needs Different Packaging

Activewear is harder to pack well than a woven blouse, and the failures are silent until the carton is opened on the other side of the world. Four risks drive every spec decision below:

Brief packaging on the tech pack, not in the email after. The single biggest cause of "wrong carton / missing barcode" complaints is leaving packing to a verbal note. Put polybag type, carton size and labelling on the same file as the garment spec so the factory locks it before bulk.

Polybag Specs (Per Garment)

Every finished piece ships in its own resealable polybag. Standard export specs:

AttributeStandardNote
MaterialLDPE or PP, 40–60 micronClear standard; frosted for premium retail
ClosureSelf-seal adhesive stripResealable preferred for boutiques
SizeGarment + 2–3 cm slackNever drum-tight on stretch seams
SafetySuffocation warning printedRequired for US / EU / CN export
IDSKU / barcode stickerMatches the packing list

For sea freight or hot-humid routes into the Gulf and West Africa, we add a 1–2 g silica sachet per polybag at no charge on request, because the container can sit for weeks at high humidity before it reaches Lagos or Jeddah.

Carton Standards for Export

Cartons take the real punishment, so we default to export-grade board and conservative weights:

Do not overpack a carton to hit a cube target. A 30 kg carton of compressed leggings can crease the bottom layers permanently and triggers overweight handling fees at the destination warehouse. We cap weight and add a carton rather than crush the stack.

Retail-Ready Packaging

If you sell into shops rather than only online, retail-ready (shelf-ready) packing saves your warehouse labour and pleases buyers:

The same nylon-spandex backbone that feeds our yoga wear manufacturer line means a buyer can run leggings, sets and bras under one barcode convention and one carton plan, which keeps picking accuracy high on re-orders.

Labelling & Compliance

Every carton and garment needs the right paperwork to clear customs and pass retailer QA:

LabelRequirementMarket note
Care labelFibre content, washing, originAQL-acceptable placement
Country of origin"Made in China"Mandatory on outer carton
Recycled claimsGRS / OEKO-TEX on fileNeeded for recycled poly styles
Arabic / FrenchTranslated care & contentGCC and West Africa buyers

If your line uses recycled polyester, we can supply GRS-certified fabric and the matching transaction certificate chain; see our recycled fabric OEM options guide for the cost impact. For Gulf and African destinations, Arabic or French care labels are a small add-on that removes a common clearance delay.

Cost, MOQ & Lead Time

Standard activewear packing terms sit inside the same low-MOQ programme as the garment itself:

ItemStandardNote
Plain polybagIncludedLDPE 40–60 micron, suffocation warning
Custom printed polybag+ one-time setupYour logo, minimum run applies
CartonIncluded5-ply export grade, shipping marks
Hangtag / label$0.05–0.15 / pcBarcode, size, care, origin
MOQ100 pcs per style / colourSame as the garment run
Lead time10–15 daysFrom approved sample
Price basisFOB from $4.08China port; freight by your forwarder

We quote FOB (China port) only and do not act as a door-to-door (DDP) shipper. Your freight forwarder handles international transit and destination clearance while we prepare the commercial invoice, packing list, HS code and certificate of origin. Running leggings, sets and packaging under the two-piece set manufacturing programme keeps one barcode convention, one logo setup and one shipment, which lowers your per-style cost on a first run. For a fuller export view, our carton marking and packaging guide covers shipping marks in detail.

Frequently Asked Questions

Do you polybag every garment individually?

Yes. Every finished piece ships in its own resealable LDPE or PP polybag with a suffocation warning and a SKU or barcode sticker, and we bag each colour separately to prevent transfer during long transit.

Can you do retail-ready packing with barcodes?

Yes. We supply hangtags with scannable UPC/EAN barcodes, size and care summaries, folded presentation on backing cards or tissue, and open-top display cartons for high-volume SKUs, all built into the same production run.

What carton size and weight do you use?

We default to 5-ply export cartons near 60 × 40 × 40 cm with a 20–25 kg gross weight cap, reinforced taping and full shipping marks including "Made in China" and carton numbering.

Do you provide Arabic or French labels for GCC and Africa?

Yes, on request. Translated care and fibre-content labels are a small add-on that prevents a common clearance delay at Jeddah, Lagos and Douala, and we apply them at the same stage as the English care label.

How are activewear shipments priced?

FOB from a China port, from $4.08, with packing list, commercial invoice, HS code and certificate of origin prepared alongside the garment. We do not quote DDP or door-to-door, which keeps your landed cost in your control and lets your own forwarder manage international transit and clearance.

Related Articles

First time importing custom clothing?

Our free Buyer’s Guide walks you through MOQ, sampling, production timelines, fabric selection and QC — everything you need before placing your first order.

Read the Buyer’s Guide →
EG

Essty Garment 中东与运动服生产团队

广州服装制造与出口团队,专注中东 / 非洲 / 中亚市场女性中大码时装与运动服。本文基于我们多年的运动服 OEM/ODM 与出口包装实操经验撰写。了解我们的工厂 →

Get a Quote WhatsApp